For a home renovation, decide materials room by room rather than category by category. Fix the plywood grade first based on moisture exposure, then choose laminate or veneer for the visible surfaces, then glass where light, partitions or mirrors are involved, and finally hardware — because hinges, channels and handles determine how the furniture feels every day. Finalise all four before carpentry begins so cutting lists, sizes and quantities can be planned in one go.
Step 1 — Map the rooms and their exposure
- Kitchen and bathroom: water contact likely — plan for boiling-water-resistant grades
- Bedrooms and living room: dry areas where commercial grade is commonly used
- Balcony and utility: consider PVC or WPC boards instead of wood-based panels
- Study and office: moderate use, but plan for load on shelves
Step 2 — Choose the surface finish
Laminate is the surface everyone sees and touches, so pick it against the actual plywood or veneer sample in daylight. Matt and suede textures hide fingerprints better than high gloss, which matters in kitchens and family homes. Order the full requirement in one lot so shades stay consistent.
Step 3 — Decide where glass belongs
- Wardrobe and dressing mirrors
- Toughened glass for shower partitions and table tops
- Designer or frosted glass for internal partitions and door panels
- Glass shelving in display and crockery units
Step 4 — Do not leave hardware till last
Hinges, drawer channels, handles and locks decide whether a wardrobe still closes cleanly after a few years. Deciding hardware early also matters practically: soft-close channels and lift-up fittings affect internal sizes, so the carpenter needs the decision before cutting.
What to finalise before carpentry starts
| Decision | Why it must come first |
|---|---|
| Plywood grade and thickness | Drives the cutting list and the sheet count |
| Laminate or veneer selection | Batch consistency requires ordering together |
| Glass sizes | Toughened glass cannot be cut after tempering |
| Hardware type | Channels and hinges change internal dimensions |
Does buying everything from one supplier help?
It can simplify the project. When plywood, laminate, glass, ACP and hardware come from one showroom, quantities are planned together, deliveries can be coordinated with the site schedule, and there is a single point of contact if something needs to be matched or replaced mid-job. That is the practical advantage of a multi-category showroom rather than a claim about price.
Bring your drawings or room measurements to the showroom in Mandi 365 Head and we can work through the list category by category.
Frequently asked questions
What should I decide first in a renovation — material or design?
Design and room function first, then material grade, then finish and hardware. Grade depends on where the furniture sits, so the room plan has to come before the material list.
Can I buy plywood, glass and hardware together?
Yes. Rajasthan Plywood & Glass Home stocks plywood, laminates, veneers and panels, glass and mirror, ACP sheets and furniture hardware at one showroom in Mandi 365 Head.
Shop these materials at the showroom
Still deciding? Ask us directly.
Visit the showroom near Lakeshar Tent House, Mandi 365 Head, or send your requirement.
