Buying guides from the RPGH365 showroom floor

Latest articles

Cabinet hinge being adjusted with a screwdriver

How to Maintain Hinges, Channels and Handles

A few minutes of care keeps cabinet hardware smooth and quiet. Here is what to do.

17 October 2026 4 min

Cabinet handles in different metal finishes

How to Match Handle Finishes with Your Furniture

Handles are small, but a mismatched finish stands out. Here is how to choose them with your laminate.

16 October 2026 4 min

Wardrobe fittings including hanging rails and baskets

Wardrobe Fittings: What Goes Inside a Modern Wardrobe

A wardrobe works well when the fittings follow how you actually store things. Use this checklist.

15 October 2026 4 min

Cabinet hinges and drawer channels on display

Drawer Channels and Hinges: The Basics

Hinges and channels decide how furniture feels every day. Here are the basics before you buy.

14 October 2026 5 min

ACP Sheet Colours and Finishes: How to Choose

A facade is seen from the street in full sun. Here is how to pick an ACP finish that looks right there.

13 October 2026 4 min

How to Clean and Maintain ACP Cladding

ACP facades stay looking even with gentle, regular cleaning. Here is a safe routine.

12 October 2026 4 min

ACP sheet panels used for building facade cladding

ACP Sheets for Interior vs Exterior Applications

Outdoor facades and indoor feature walls ask very different things of an ACP panel. Here is how to think about each.

11 October 2026 5 min

How to Clean and Maintain Glass Surfaces

Streak-free glass is mostly about the cloth and the drying, not the cleaner.

10 October 2026 4 min

Wall-mounted mirror in a well-lit interior

Mirrors for the Home: Placement and Care Basics

Size, fixing and edge protection decide how well a mirror lasts — particularly in bathrooms.

9 October 2026 4 min

Choosing Glass for Table Tops and Shelves

Thickness, edge finish and support spacing are one decision, not three. Here is how they fit together.

8 October 2026 5 min

Engineered board panels stacked in a materials showroom

MDF and HDHMR Boards: Where Each Is Used

Both are engineered boards with smooth faces. The difference shows up in density, moisture tolerance and how they hold screws.

7 October 2026 5 min

Decorative wood-finish panels fitted to an interior wall

How to Choose Decorative Panels for Wall Cladding

Panelling succeeds or fails on preparation. Sort the wall and the joint layout before choosing the finish.

6 October 2026 5 min

Polished natural wood veneer surface showing grain

How to Care for Veneered and Polished Furniture

Veneer is real wood under a polish. Treat it like wood and it keeps its depth for years.

5 October 2026 4 min

Laminate colour samples laid out for comparison

How to Match Laminate Colours Across a Room

Individually good choices can clash on a wall. A short sampling method keeps the whole room coherent.

4 October 2026 4 min

Cabinet shutter samples in laminate and high-gloss acrylic finishes

Laminate vs Acrylic Shutters: A Neutral Comparison

Both give a good kitchen. They differ in the depth of the gloss, how marks show and how carefully they need handling.

3 October 2026 5 min

Soft cloth wiping a laminated cabinet surface

How to Clean and Maintain Laminated Surfaces

Laminate is easy to look after, provided the cleaning routine avoids abrasives, solvents and standing water at the edges.

2 October 2026 4 min

Laminate Thickness: Which Suits Each Surface?

Laminate thickness follows wear. Exposed, hard-working surfaces take heavier sheets; internal faces do not need them.

1 October 2026 4 min

Common Mistakes When Buying Plywood

Most plywood regrets trace back to four or five avoidable decisions made at the counter. Here they are.

30 September 2026 5 min

How to Store and Handle Plywood Before Use

Sheets that arrive flat should stay flat. A few storage habits prevent bow, damp faces and damaged corners before fitting.

29 September 2026 4 min

Why Edge Banding Matters on Plywood Furniture

The edge is the most exposed part of any panel. Banding protects the core and finishes the look of shutters and shelves.

28 September 2026 5 min

Matte, Gloss or Textured: Choosing a Laminate Finish

Finish is a maintenance decision as much as a design one. Here is how matte, gloss and textured laminates behave in daily use.

27 September 2026 5 min

Soft-Close vs Standard Hinges and Channels

Soft-close fittings stop slamming and reduce wear in high-use furniture. Standard fittings still make sense elsewhere.

30 August 2026 4 min

Aluminium composite panel sheets in assorted finishes stacked at a showroom

ACP Sheet Thickness: What to Ask For

Panel thickness, aluminium skin and finish are three separate things. Confirm all of them together when ordering ACP.

30 August 2026 4 min

Toughened vs Normal Glass: When Is Each Used?

Toughened glass is processed for strength and safer breakage, and cannot be cut afterwards. Here is where each type belongs.

30 August 2026 5 min

Natural wood veneer sheets displayed beside decorative laminate samples

Veneer vs Laminate: Which Surface Should You Pick?

One is real wood that is polished on site, the other is a factory-made decorative sheet. Here is how to choose between veneer and laminate.

30 August 2026 5 min

Block Board vs Plywood: Which Suits Your Furniture?

Block board resists sagging over long spans; plywood holds screws better and handles structural work. Here is how to decide between them.

30 August 2026 5 min

Interior material showroom display with plywood, laminate and panel samples in Rajasthan

Business / Local Guides

How to Compare Plywood and Interior Material Suppliers in Rajasthan

Authorised brand channels, range across categories, clear invoicing and delivery reach matter more than a headline rate. A neutral comparison checklist.

13 August 2026 6 min

Plywood, laminate samples and cabinet hardware laid out for a home renovation selection

How to Choose Plywood, Glass and Hardware for a Home Renovation

Work room by room, fix the grade before the finish, and decide hardware early. A practical sequence for renovation material selection.

12 August 2026 7 min

How to Identify Genuine Plywood Before You Buy

Stamps, edges, weight and paperwork tell you more than the price does. A practical checklist for inspecting plywood before it reaches your site.

11 August 2026 5 min

MR and BWR grade plywood sheets stacked side by side at the RPGH365 showroom

MR vs BWR Plywood: What the Difference Actually Means

MR is a moisture-resistant grade for dry interiors; BWR/BWP uses a boiling-water-resistant adhesive for kitchens and wet areas. Here is the practical difference.

10 August 2026 6 min

Aluminium composite panel sheets stacked in a warehouse

ACP Sheet Buying Guide

Aluminium composite panels are common on façades and signage. What to consider before specifying them.

9 August 2026 5 min

Doors

Flush Door Buying Guide

Flush doors are simple to specify once you know what to look at — construction, fit, finish and the hardware they must carry.

7 August 2026 5 min

Cabinet handles, hinges and drawer channels displayed on a board

How to Choose Cabinet Handles and Hardware

Hardware is the part of furniture people touch every day. How to choose handles, hinges and drawer systems sensibly.

5 August 2026 5 min

Glass Thickness Guide for Home & Interior Applications

Thickness is chosen from span, support and safety — not from a single universal number. A practical orientation.

3 August 2026 5 min

How to Choose the Right Laminate for Furniture

Finish, thickness and how the surface will be used matter more than the shade card. A practical way to choose laminate.

1 August 2026 5 min

How to Choose Plywood for Kitchen Cabinets

Kitchens combine water, heat and heavy hardware. Here is how to think about board selection for base units, wall units and shutters.

30 July 2026 6 min

Plywood and MDF boards shown side by side

Plywood vs MDF: Which One Should You Choose?

Plywood and MDF are different materials with different jobs. A neutral comparison of how they behave in furniture.

28 July 2026 6 min

8×4 Plywood Sheet Square Feet Calculation

An 8×4 sheet is 32 square feet. The calculation, other common sizes, and how to estimate sheet counts for a job.

25 July 2026 4 min